phone: 02-954-2408-9, 089-514-8111

ใหม่ สินค้าหมด

(ยกเลิกจำหน่าย / Retired) Samsung’s S3C2410A ARM920T Stamp Board

sku : ETCT001_Retired
(ยกเลิกจำหน่าย / Retired) Board ทดลองในตระกูล ARM920T โดยใช้ CPU Samsung S3C2410A ออกแบบให้เป็นแบบ Stamp บอร์ด ใช้งานง่าย พร้อมตัวอย่าง และ เอกสารการใช้งาน

สถานะของสินค้า : สินค้าหมด




รหัส :ETCT001

ยี่ห้อ : TinCanTools

รุ่น : Hammer


(ยกเลิกจำหน่าย / Retired) The Hammer CPU module is based upon Samsung’s S3C2410A ARM920T processor. It gives you the power of an ARM9 processor in an easy to use modular package. The Hammer CPU module fits into a standard 40 pin DIP socket. It is an ideal platform for code development and prototyping in an embedded environment. You can quickly interface to the Hammer using your standard prototyping tools that are based upon 0.1 inch centers.


Hardware Specifications:

- Microprocessor ( CPU ): S3C2410A - Samsung (200 MHz)
- ARM 920T core with Cache (16K+16K) and MMU
- Main Memory: 32MB SDRAM (16M x 16 bit, 100MHz)
- FLASH : 16MB NOR Flash
- Peripherals available: 
  2 UART’s (also supports IrDA)
  1 I2C
  2 SPI’s
  2 16-bit Timers/PWM’s
  1 8-bit LCD Interface + control signals
  1 USB Host Port
  1 USB Slave Port
  2 ADC’s (10 bit )
  4 External Interrupt pins
- 1 Up to 30 pins of GPIO’s (note: some of the GPIO’s and peripherals share the same pins. You must select either General Purpose I/O pins or their alternate peripheral functions.)
- JTAG Interface: 2 x 7 Header – standard JTAG interface
- Size: 0.75 inches (width) X 2.25 inches (length)
- Package: Fits a standard 40-pin DIP socket (0.1 inch lead spacing)
- Power Requirements: +5VDC @ 120 mA (typical)
- Operating Temperature: 0? to 70? C  (32? to 158? F) (Commercial Temp)

The Hammer comes preloaded with an open source bootloader, Linux 2.6 kernel, and a uClibc/Busybox based root file system. Board schematics, application notes, and source code are also included on the CD.




Other Hammer Documentation:

More information on the Hammer can be found on the wiki located here:

- Ethernet :
- Bluetooth :
- 802.11b/g :
- Webcam :
- HOWTOs :
- Software :
- Languages :
- Kernel Drivers :

Information on three basic types of operations with a LED are documented here:

Additional information about the Apex bootloader can be found here:

The following wiki pages have information on using the Flyswatter:

How to install OpenOCD for the Flyswatter

Gentoo Linux ( ) has a web page dedicated to the Hammer and Nail board:;chap=1



  • ETCT001 - Hammer x 1
    (Download ข้อมูลการใช้งานได้จาก Information Support)





Country of Manufacture



Only registered users can write reviews. Please, log in or register

Memory usage: real: 22282240, emalloc: 20318312
Code ProfilerTimeCntEmallocRealMem