phone: 02-954-2408-9, 089-514-8111

Pololu USB AVR Programmer v2.1

sku : EFDV677
The Pololu MinIMU-9 v5 is an inertial measurement unit (IMU) that packs an LSM6DS33 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis magnetometer onto a tiny 0.8″ × 0.5″ board.
Only 5 left

สถานะของสินค้า : สินค้าพร้อมส่ง

฿350.00

With this product, you earn 14 loyalty point(s).

รายละเอียดสินค้า

รายละเอียด

SKU : EFDV677
Brand : Pololu
Model : #3172

 
 
The Pololu USB AVR Programmer v2.1 is a compact, low-cost in-system programmer (ISP) for AVR microcontrollers from Atmel (now a part of Microchip). The programmer provides an interface for transferring a compiled AVR program from your computer to the target AVR’s non-volatile memory, allowing it to run the program. It is a good solution for programming AVR-based controllers.

The programmer connects to your computer’s USB port via a standard USB A to Micro-B cable (not included) and communicates with your programming software, such as Atmel Studio, AVRDUDE, or the Arduino IDE, through a virtual COM port using the STK500 protocol. The programmer connects to your target device via an included 6-pin ISP programming cable (the older, 10-pin ISP connections are not directly supported, but it’s easy to create or purchase a 6-pin-to-10-pin ISP adapter). The programmer also acts as a USB-to-TTL serial adapter, providing a TTL-level serial port that can be used to communicate with other serial devices from your computer. It ships fully assembled with connectors soldered in as shown.

 

Features and Specifications:

  • Connects to a computer through USB via a USB A to Micro-B cable (not included)
  • Emulates an STK500 programmer through virtual COM port interface
  • Works with standard AVR programming software, including Atmel Studio, AVRDUDE, and the Arduino IDE
  • Configuration software available for Windows, Mac OS X, and Linux
  • Supports both 3.3 V and 5 V devices; can automatically switch operating voltage based on detected target VCC
  • Can optionally power the target at 3.3 V or 5 V in low-power systems
  • USB-to-TTL serial adapter functionality for general-purpose serial communication
  • Provides a 100 kHz clock output, which can be useful for reviving misconfigured AVRs
  • All I/O pins are protected with 470 Ω resistors
  • 6-pin ISP cable and a 1×6 double-sided male header included

 

Information Support:

 

Product included:

  • EFDV677 - Pololu USB AVR Programmer v2.1 x 1 pcs

 

Warranty

 

ข้อมูลเพิ่มเติม

ข้อมูลเพิ่มเติม

ManufacturerPololu
Country of Manufacture

รีวิวสินค้า

เขียนรีวิวสินค้าของคุณเอง

Only registered users can write reviews. Please, log in or register

[profiler]
Memory usage: real: 24117248, emalloc: 23243408
Code ProfilerTimeCntEmallocRealMem