Currency :
Login Register

Login to your account

Username
Password *
Remember Me

Create an account

Fields marked with an asterisk (*) are required.
Name
Username
Password *
Verify password *
Email *
Verify email *
Captcha *

Search

เพิ่มเพื่อน

Your Cart

ไม่มีสินค้าในตะกร้า

new customer 200p

AW Banner 01 01 01

Preorder Logo

Free Shipping 200x200

Promotion

Our Products

Cytron Maker pHAT for Raspberry Pi
รหัสสินค้า: EFDV695


400.00 บาท
In stock 7

บอร์ดเสริม Maker pHAT version 1.1 เป็นบอร์ดเสริมสำหรับผู้เริ่มใช้งาน Raspberry Pi บนตัวบอร์ดมีทั้ง LEDs, push buttons และ buzzer ซึ่งช่วยให้ผู้เริ่มต้นใช้งาน Raspberry Pi ได้ง่ายขึ้น


รหัส : EFDV695

ยี่ห้อ : Cytron

รุ่น : HAT-MAKER

บอร์ดเสริม Maker pHAT version 1.1 เป็นบอร์ดเสริมสำหรับผู้เริ่มใช้งาน Raspberry Pi บนตัวบอร์ดมีทั้ง LEDs, push buttons และ buzzer ซึ่งช่วยให้ผู้เริ่มต้นใช้งาน Raspberry Pi ได้ง่ายขึ้น

 

What is HAT? HAT means Hardware Attached on Top. If Arduino have Shield, Raspberry Pi (refer to Raspberry Pi B+/2/3/3B+) uses HAT. But with the smaller board, Raspberry Pi Zero/W/WH is introduced, pHAT (partially Hardware Attached on Top) emerged too. Shield and HAT/pHAT have the same objective - to ease the hardware development.

 

Raspberry Pi aims to bring the power of computing and digital making to the masses. It is being used by many educators, makers, and also engineers. I am sure you will have similar constraints when get started from scratch, example:
• Lack of on board USB to UART communication for your computer to get the ip address for SSH (headless), or to kick start configuration directly.
• There is no GPIO status indicator when you write program to control particular pin.
• Access to GPIO is kind of difficult because there is no label, you need to search online to get the designated pin.
• And there is no extra programmable push button for proper shutdown (hardware) :(

We would like to introduce Maker pHAT. It is designed to ease everyone in getting started with Raspberry Pi in the absence of additional monitor, keyboard or mouse (Headless); and also prototyping. It helps user to remote access Raspberry Pi through serial with minimum steps. The on board LEDs, push buttons and buzzer will further assist beginner in interfacing with sensors, actuator and coding.

Note: Maker pHAT is in Rev1.1 (which uses FDTI FT231X as USB to UART chip) starting from Jan 2019.

 

Product Features:
• Raspberry Pi Zero Size, stack perfectly on to Pi Zero Series of SBC (Single Board Computer).
• Compatible with standard Raspberry Pi 3B/3B+ and small size Raspberry Pi Zero/W/WH.
• Standard Raspberry Pi GPIO footprint.
• LED array for selected GPIO pins (GPIO 17, 18, 27, 22, 25, 12, 13, 19).
• 3x on board programmable push buttons (GPIO 21, 19 and 20, need to configure as input pull up).
• On board active buzzer (GPIO 26).
• Proper label for all GPIOs, including SPI, UART, I2C, 5V, 3.3V, and GND.
• Utilize USB Micro-B socket for 5V input and USB to UART communication.
• USB serial facilitated by the CH340.
• Input voltage: USB 5V, from computer, power bank or standard USB adapter.
• PURPLE PCB!

Information Support:

Documents:

Product included: 

  • EFDV695 Cytron Maker pHAT for Raspberry Pi x 1 pcs
  • 2x20 Stacking Header x 1 pcs

Warranty

 

Newsletter

Follow Us