phone: 02-954-2408-9, 089-514-8111

Cytron Maker pHAT for Raspberry Pi

sku : EFDV695
บอร์ดเสริม Maker pHAT version 1.1 เป็นบอร์ดเสริมสำหรับผู้เริ่มใช้งาน Raspberry Pi บนตัวบอร์ดมีทั้ง LEDs, push buttons และ buzzer ซึ่งช่วยให้ผู้เริ่มต้นใช้งาน Raspberry Pi ได้ง่ายขึ้น
Only 4 left

สถานะของสินค้า : สินค้าพร้อมส่ง

฿400.00

With this product, you earn 16 loyalty point(s).

รายละเอียดสินค้า

รายละเอียด

รหัส : EFDV695

ยี่ห้อ : Cytron

รุ่น : HAT-MAKER

 

บอร์ดเสริม Maker pHAT version 1.1 เป็นบอร์ดเสริมสำหรับผู้เริ่มใช้งาน Raspberry Pi บนตัวบอร์ดมีทั้ง LEDs, push buttons และ buzzer ซึ่งช่วยให้ผู้เริ่มต้นใช้งาน Raspberry Pi ได้ง่ายขึ้น

What is HAT? HAT means Hardware Attached on Top. If Arduino have Shield, Raspberry Pi (refer to Raspberry Pi B+/2/3/3B+) uses HAT. But with the smaller board, Raspberry Pi Zero/W/WH is introduced, pHAT (partially Hardware Attached on Top) emerged too. Shield and HAT/pHAT have the same objective - to ease the hardware development.

Raspberry Pi aims to bring the power of computing and digital making to the masses. It is being used by many educators, makers, and also engineers. I am sure you will have similar constraints when get started from scratch, example:
• Lack of on board USB to UART communication for your computer to get the ip address for SSH (headless), or to kick start configuration directly.
• There is no GPIO status indicator when you write program to control particular pin.
• Access to GPIO is kind of difficult because there is no label, you need to search online to get the designated pin.
• And there is no extra programmable push button for proper shutdown (hardware) :(

We would like to introduce Maker pHAT. It is designed to ease everyone in getting started with Raspberry Pi in the absence of additional monitor, keyboard or mouse (Headless); and also prototyping. It helps user to remote access Raspberry Pi through serial with minimum steps. The on board LEDs, push buttons and buzzer will further assist beginner in interfacing with sensors, actuator and coding.

Note: Maker pHAT is in Rev1.1 (which uses FDTI FT231X as USB to UART chip) starting from Jan 2019.

Product Features:
• Raspberry Pi Zero Size, stack perfectly on to Pi Zero Series of SBC (Single Board Computer).
• Compatible with standard Raspberry Pi 3B/3B+ and small size Raspberry Pi Zero/W/WH.
• Standard Raspberry Pi GPIO footprint.
• LED array for selected GPIO pins (GPIO 17, 18, 27, 22, 25, 12, 13, 19).
• 3x on board programmable push buttons (GPIO 21, 19 and 20, need to configure as input pull up).
• On board active buzzer (GPIO 26).
• Proper label for all GPIOs, including SPI, UART, I2C, 5V, 3.3V, and GND.
• Utilize USB Micro-B socket for 5V input and USB to UART communication.
• USB serial facilitated by the CH340.
• Input voltage: USB 5V, from computer, power bank or standard USB adapter.
• PURPLE PCB!

Information Support:

Documents:

Product included: 

  • EFDV695 Cytron Maker pHAT for Raspberry Pi x 1 pcs
  • 2x20 Stacking Header x 1 pcs

Warranty

 

 

ข้อมูลเพิ่มเติม

ข้อมูลเพิ่มเติม

ManufacturerCytron Technology
Country of Manufacture

รีวิวสินค้า

เขียนรีวิวสินค้าของคุณเอง

Only registered users can write reviews. Please, log in or register